Athlete Piping Solution is a branded distributor and exporter of Monel Alloy 400 Threaded Fittings, which is non-magnetic within the annealed circumstance and may be hardened handiest by means of cold working. Monel UNS N04400 Threaded Union Fittingsstrong> is columbium-stabilized austenitic steel which resists carbide precipitation in the course of welding and intermittent heating to 800 Degree F / 1650 Degree F (427 Degree C / 899 Degree C). They are having appropriate excessive temperature scale resistance. They are advocated for elements fabricated by means of welding which cannot be finally annealed. It is a widespread cause austenitic steel this is stabilized towards carbide precipitation and designed to work in the carbide precipitation temperature variety. Meanwhile, titanium is introduced on this steel to the alloy's composition, for to suppress grain boundary chromium carbide precipitation and decrease susceptibility to intergranular corrosion.
Monel WNR 2.4361 Threaded Plug Fittings is a heat resistant, titanium stabilized, austenitic alloy it's usually used for carrier within the one thousand Degree F – 1600 Degree F temperature variety. They are commonly utilized in applications that contain non-stop and intermittent carrier temperatures in the carbide precipitation variety of 800 Degree – 1500 Degree F. They are very a lot much like other steel, however with titanium addition of at the least certain instances the carbon content material. They are molybdenum-containing austenitic steel supposed to offer stepped forward corrosion resistance relative in quite corrosive method environments, especially the ones containing chlorides or different halides.
The low carbon lets in these Nickel Alloy 400 Threaded Bushing Fittings, for to be welded without sensitization to intergranular corrosion on account of chromium carbide precipitation within the grain boundaries. It is non-magnetic within the annealed circumstance however can also additionally end up barely magnetic due to welding. On the opposite hand, not like carbon steels, it has a higher efficiency and hardens extra strongly, desiring extra controlling system to manufacture and shape it. It is molybdenum-containing austenitic steel supposed to offer stepped forward corrosion resistance. It gives relative in fairly corrosive method environments, especially the ones containing chlorides or different halides.
Specifications | ASTM B564 / ASME SB564 |
---|---|
Size | 1/8″ NB to 4″ NB Screwed-Threaded |
Dimensions | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
Class | 2000lb/ 3000lb/ 4000lbs |
From | 90º Elbows, 45º Elbows, Tees, Cross, Couplings, Reducers, Inserts, Caps, Nipples, Unions, Equal Tees & Reducing Tees, Plugs. |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
400 | 2.4360 | N04400 | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
American Steel Threaded Fittings Standard | |
Standard Code | Standard Name |
ANSI ASME SA-182 | Forged fittings |
ANSI ASME B16.11 | Socket-welding and Threaded forged fittings |
MSS SP-79 | Socket-welding reducing Inserts |
MSS SP-83 | Class 3000 steel socket-welding and threaded unions |
MSS SP-95 | Swaged nipples and round plugs |
MSS SP-97 | SW,TH and BW ends for integrally reinforced forged branch outlet |
Looking to Buy Monel 400 Threaded Fittings from Suppliers, Ask For ready stock of UNS N04400 Threaded Elbow in Mumbai, India.
Grade | C | Mn | Si | S | Cu | Fe | Ni |
400 | 0.30 max | 2.00 max | 0.50 max | 0.024 max | 28.00 – 34.00 | 2.50 max | 63.00 min |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
400 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |
DN | NPS | Center to End NPT Elbow, NPT Tee, NPT Cross A |
Center to End 45 Deg Elbow C |
O.D. of Band H |
Min. Wall Thick. G |
Length of Thread. Minimum (1) |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Class 2000 | Class 3000 | Class 6000 | Class 2000 | Class 3000 | Class 6000 | Class 2000 | Class 3000 | Class 6000 | Class 2000 | Class 3000 | Class 6000 | B | L2 | ||
6 | 1/8 | 21 | 21 | 25 | 17 | 17 | 19 | 22 | 22 | 25 | 3.18 | 3.18 | 6.35 | 6.4 | 6.7 |
8 | 1/4 | 21 | 25 | 28 | 17 | 19 | 22 | 22 | 25 | 33 | 3.18 | 3.30 | 6.60 | 8.1 | 10.2 |
10 | 3/8 | 25 | 28 | 33 | 19 | 22 | 25 | 25 | 33 | 38 | 3.18 | 3.51 | 6.98 | 9.1 | 10.4 |
15 | 1/2 | 28 | 33 | 38 | 22 | 25 | 28 | 33 | 38 | 46 | 3.18 | 4.09 | 8.15 | 10.9 | 13.6 |
20 | 3/4 | 33 | 38 | 44 | 25 | 28 | 33 | 38 | 46 | 56 | 3.18 | 4.32 | 8.53 | 12.7 | 13.9 |
25 | 1 | 38 | 44 | 51 | 28 | 33 | 35 | 46 | 56 | 62 | 3.68 | 4.98 | 9.93 | 14.7 | 17.3 |
32 | 1-1/4 | 44 | 51 | 60 | 33 | 35 | 43 | 56 | 62 | 75 | 3.89 | 5.28 | 10.59 | 17.0 | 18.0 |
40 | 1-1/2 | 51 | 60 | 64 | 35 | 43 | 44 | 62 | 75 | 84 | 4.01 | 5.56 | 11.07 | 17.8 | 18.4 |
50 | 2 | 60 | 64 | 83 | 43 | 44 | 52 | 75 | 86 | 102 | 4.27 | 7.14 | 12.09 | 19.0 | 19.2 |
65 | 2-1/2 | 76 | 83 | 95 | 52 | 52 | 64 | 92 | 102 | 121 | 5.61 | 7.65 | 15.29 | 23.6 | 28.9 |
85 | 3 | 86 | 95 | 106 | 64 | 64 | 79 | 109 | 121 | 146 | 5.99 | 8.84 | 16.64 | 25.9 | 30.5 |
100 | 4 | 106 | 114 | 114 | 79 | 79 | 79 | 146 | 152 | 152 | 6.55 | 11.18 | 18.67 | 27.7 | 33.0 |
DN | NPS | End to End Couplings W |
End to End Caps P |
O.D. D | End Wall Thick. G Minimum |
Length of Thread. Minimum (1) |
||||
---|---|---|---|---|---|---|---|---|---|---|
Class 3000&Class 6000 | Class 3000 | Class 6000 | Class 3000 | Class 6000 | Class 3000 | Class 6000 | B | L2 | ||
6 | 1/8 | 32 | 19 | … | 16 | 22 | 4.8 | … | 6.4 | 6.7 |
8 | 1/4 | 35 | 25 | 27 | 19 | 25 | 4.8 | 6.4 | 8.1 | 10.2 |
10 | 3/8 | 38 | 25 | 27 | 22 | 32 | 4.8 | 6.4 | 9.1 | 10.4 |
15 | 1/2 | 48 | 32 | 33 | 28 | 38 | 6.4 | 7.9 | 10.9 | 13.6 |
20 | 3/4 | 51 | 37 | 38 | 35 | 44 | 6.4 | 7.9 | 12.7 | 13.9 |
25 | 1 | 60 | 41 | 43 | 44 | 57 | 9.7 | 11.2 | 14.7 | 17.3 |
32 | 1-1/4 | 67 | 44 | 46 | 57 | 64 | 9.7 | 11.2 | 17.0 | 18.0 |
40 | 1-1/2 | 79 | 44 | 48 | 64 | 76 | 11.2 | 12.7 | 17.8 | 18.4 |
50 | 2 | 86 | 48 | 51 | 76 | 92 | 12.7 | 15.7 | 19.0 | 19.2 |
65 | 2-1/2 | 92 | 60 | 64 | 92 | 108 | 15.7 | 19.0 | 23.6 | 28.9 |
80 | 3 | 108 | 65 | 68 | 108 | 127 | 19.0 | 22.4 | 25.9 | 30.5 |
100 | 4 | 121 | 68 | 75 | 140 | 159 | 22.4 | 28.4 | 27.7 | 33.0 |
ASME B16.11 Pressure-Temperature | |||||
---|---|---|---|---|---|
Temperature | Class | ||||
150 | 300 | ||||
1/4 – 1 inch. | 1 1/4 – 2 inch. | 2 1/2 – 3 inch. | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | – | 935 | 750 | 560 |
450 | 232 | – | 725 | 600 | 475 |
500 | 260 | – | 510 | 450 | 385 |
550 | 288 | – | 300 | 300 | 300 |
MIDDLE EAST Saudi Arabia |
AFRICA Nigeria NORTH AMERICA Usa |
EUROPE Russia |
ASIA India SOUTH AMERICA Argentina |