Athlete Piping Solution is a branded exporter and supplier of Stainless Steel 317 Threaded Fittings, which are regularly termed as excessive temperature ferrite steel. Stainless Steel UNS S31700 Threaded Cross Fittings gives via the thermal conductivity advanced and the thermal growth inferior than the specific values for austenitic steels. Alike thermal shocks, it'll final results in subordinate thermal stresses within the ferrite material. In these idioms, it allow higher acceptances for operation and design. At room temperature, these have mechanical traits identical to their austenitic foils. When subjected to extended temperatures, that are much less than Six Hundred Deg Celsius, the creep efficiency on this steel drops in all likelihood to simply the really well worth austenitic warmness resistant steels illustrate at the same conditions.
Stainless Steel WNR 1.4449 Threaded Cap Fittings is a steel extended temperature grade within the organization of thirteen percentage chromium, and isn't big in phrases of embrittlement. They are being sourced via way of the use of excessive high-satisfactory of raw material and makes positive to offer sturdiness of maximum high-satisfactory of enterprise standard products. As their high feature is to live on corrosion at extended temperatures, these ferrite warmness resistant products aren't possibly to hold out well in low temperature atmospheres, similar to different warmness resistant steels. As a result, they're now no longer immune to acid condensates etc.
The contents of alloy in these Alloy 317 Threaded Coupling Fittings decide whether or not or now no longer a protecting oxide coating may be formed or maintained to begin with, or if different unfavourable responses can also additionally possibly occur. Meanwhile, to which quantity a material is tough to hot gases, it is definitely individually linked to the composition of this specific material. Tactlessness to falling sulphurous gases is the maximum exceptional function of these excessive temperature ferrite alloy. Since business atmospheres via way of and massive encompass an aggregate of pretty numerous aggressive gases, it is being understood, that the chosen grade must be a compromise. Other capabilities of these products are that it has precise resistance to oxidising and decreasing sulphur containing environments.
Specifications | ASTM A403 / ASME S403 |
---|---|
Size | 1/8″ NB to 4″ NB Screwed-Threaded |
Dimensions | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
Class | 2000lb/ 3000lb/ 6000lbs |
From | 90º Elbows, 45º Elbows, Tees, Cross, Couplings, Reducers, Inserts, Caps, Nipples, Unions, Equal Tees & Reducing Tees, Plugs. |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 317 | 1.4449 | S31700 | SUS 317 | 317S11 | – | – | – |
American Steel Threaded Fittings Standard | |
Standard Code | Standard Name |
ANSI ASME SA-403 | Forged fittings |
ANSI ASME B16.11 | Socket-welding and Threaded forged fittings |
MSS SP-79 | Socket-welding reducing Inserts |
MSS SP-83 | Class 3000 steel socket-welding and threaded unions |
MSS SP-95 | Swaged nipples and round plugs |
MSS SP-97 | SW,TH and BW ends for integrally reinforced forged branch outlet |
Looking to Buy SS 317 Threaded Fittings from Suppliers, Ask For ready stock of UNS S31700 Threaded Elbow in Mumbai, India.
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
SS 317 | 0.08 max | 2 max | 1.00 max | 0.045 max | 0.030 max | 18 – 20 | 3.00 – 4.00 | 11.00 – 15.00 | 57.845 min |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
7.9 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
DN | NPS | Center to End NPT Elbow, NPT Tee, NPT Cross A |
Center to End 45 Deg Elbow C |
O.D. of Band H |
Min. Wall Thick. G |
Length of Thread. Minimum (1) |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Class 2000 | Class 3000 | Class 6000 | Class 2000 | Class 3000 | Class 6000 | Class 2000 | Class 3000 | Class 6000 | Class 2000 | Class 3000 | Class 6000 | B | L2 | ||
6 | 1/8 | 21 | 21 | 25 | 17 | 17 | 19 | 22 | 22 | 25 | 3.18 | 3.18 | 6.35 | 6.4 | 6.7 |
8 | 1/4 | 21 | 25 | 28 | 17 | 19 | 22 | 22 | 25 | 33 | 3.18 | 3.30 | 6.60 | 8.1 | 10.2 |
10 | 3/8 | 25 | 28 | 33 | 19 | 22 | 25 | 25 | 33 | 38 | 3.18 | 3.51 | 6.98 | 9.1 | 10.4 |
15 | 1/2 | 28 | 33 | 38 | 22 | 25 | 28 | 33 | 38 | 46 | 3.18 | 4.09 | 8.15 | 10.9 | 13.6 |
20 | 3/4 | 33 | 38 | 44 | 25 | 28 | 33 | 38 | 46 | 56 | 3.18 | 4.32 | 8.53 | 12.7 | 13.9 |
25 | 1 | 38 | 44 | 51 | 28 | 33 | 35 | 46 | 56 | 62 | 3.68 | 4.98 | 9.93 | 14.7 | 17.3 |
32 | 1-1/4 | 44 | 51 | 60 | 33 | 35 | 43 | 56 | 62 | 75 | 3.89 | 5.28 | 10.59 | 17.0 | 18.0 |
40 | 1-1/2 | 51 | 60 | 64 | 35 | 43 | 44 | 62 | 75 | 84 | 4.01 | 5.56 | 11.07 | 17.8 | 18.4 |
50 | 2 | 60 | 64 | 83 | 43 | 44 | 52 | 75 | 86 | 102 | 4.27 | 7.14 | 12.09 | 19.0 | 19.2 |
65 | 2-1/2 | 76 | 83 | 95 | 52 | 52 | 64 | 92 | 102 | 121 | 5.61 | 7.65 | 15.29 | 23.6 | 28.9 |
85 | 3 | 86 | 95 | 106 | 64 | 64 | 79 | 109 | 121 | 146 | 5.99 | 8.84 | 16.64 | 25.9 | 30.5 |
100 | 4 | 106 | 114 | 114 | 79 | 79 | 79 | 146 | 152 | 152 | 6.55 | 11.18 | 18.67 | 27.7 | 33.0 |
DN | NPS | End to End Couplings W |
End to End Caps P |
O.D. D | End Wall Thick. G Minimum |
Length of Thread. Minimum (1) |
||||
---|---|---|---|---|---|---|---|---|---|---|
Class 3000&Class 6000 | Class 3000 | Class 6000 | Class 3000 | Class 6000 | Class 3000 | Class 6000 | B | L2 | ||
6 | 1/8 | 32 | 19 | … | 16 | 22 | 4.8 | … | 6.4 | 6.7 |
8 | 1/4 | 35 | 25 | 27 | 19 | 25 | 4.8 | 6.4 | 8.1 | 10.2 |
10 | 3/8 | 38 | 25 | 27 | 22 | 32 | 4.8 | 6.4 | 9.1 | 10.4 |
15 | 1/2 | 48 | 32 | 33 | 28 | 38 | 6.4 | 7.9 | 10.9 | 13.6 |
20 | 3/4 | 51 | 37 | 38 | 35 | 44 | 6.4 | 7.9 | 12.7 | 13.9 |
25 | 1 | 60 | 41 | 43 | 44 | 57 | 9.7 | 11.2 | 14.7 | 17.3 |
32 | 1-1/4 | 67 | 44 | 46 | 57 | 64 | 9.7 | 11.2 | 17.0 | 18.0 |
40 | 1-1/2 | 79 | 44 | 48 | 64 | 76 | 11.2 | 12.7 | 17.8 | 18.4 |
50 | 2 | 86 | 48 | 51 | 76 | 92 | 12.7 | 15.7 | 19.0 | 19.2 |
65 | 2-1/2 | 92 | 60 | 64 | 92 | 108 | 15.7 | 19.0 | 23.6 | 28.9 |
80 | 3 | 108 | 65 | 68 | 108 | 127 | 19.0 | 22.4 | 25.9 | 30.5 |
100 | 4 | 121 | 68 | 75 | 140 | 159 | 22.4 | 28.4 | 27.7 | 33.0 |
ASME B16.11 Pressure-Temperature | |||||
---|---|---|---|---|---|
Temperature | Class | ||||
150 | 300 | ||||
1/4 – 1 inch. | 1 1/4 – 2 inch. | 2 1/2 – 3 inch. | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | – | 935 | 750 | 560 |
450 | 232 | – | 725 | 600 | 475 |
500 | 260 | – | 510 | 450 | 385 |
550 | 288 | – | 300 | 300 | 300 |
MIDDLE EAST Saudi Arabia |
AFRICA Nigeria NORTH AMERICA Usa |
EUROPE Russia |
ASIA India SOUTH AMERICA Argentina |