Athlete Piping Solution is a recognized seller and manufacturer of SS 347H Instrumentation Tube Fittings, which is pretty recognized for its excessive pleasant, zero-defects and advanced performance. Stainless Steel UNS S34709 Instrumentation Tube Fittings is being made from by means of walking an incessant material of metallic at some point of a roll slitter. This steel is typically used for vehicle bodies, clinical tables, aircraft wings, roofs for buildings (architecture), and in plenty of different applications. This product is a welding method used to enrol in components which might be nearly parallel and do now no longer overlap. These products are very a whole lot identified for his or her hovering tensile strength, balance and specific alloy composition. Meanwhile, these products are being made up with special grades of standard tiers and meet its provisos within the route of country wide and international standards.
The maximum tremendous application for this Stainless Steel WNR 1.4961 Instrumentation Tube Fittings is in heat exchangers and heater coils. In addition, these products are as nicely pretty problem-unfastened to put in and remove. These products are positioned in braces, wherein they may be joined together within the organization of alloys. The primary feature of this product is to downsize the road from a kindly proportioned to a much less tremendous pipe size, and this surely effects in a higher glide strain.
These Alloy 347H Instrumentation Tube Fittings also are being linked at the water pump strains with the aid of the solitary application of doing away with the air blocks. It is a bit of hetero alloy with having male threads on each the ends. This steel is one of the maximum famous classes of fittings, and is a coupling connector or threaded on each the ends. This steel is used to permit plumbing for to be related to a water heater or different plumbing. This steel join pipes by means of approach of various diameters allied to it, and has a hexagonal head for a larger bearing surface while solving with the precise via a jolt.
Specifications | ASTM A182, A276, A479 / ASME SA182, SA276, SA479 |
---|---|
Size | 1/16 in. to 2 in. & 2mm to 50 mm. |
Dimensional Range | 1/16 to 2 inches (imperial); 2 to 50 mm (metric) |
Working Pressures | Upto 2000 to 6000 PSI |
Thread Type | NPT – ASME B1.20.1, SAE AS71051 | ISO/BSP Parallel – ISO 228 | ISO/BSP Tapered – ISO 7, BS EN 10226-1 | SAE (Unified) – ASME B1.1 |
End Connections | NPT, ISO/BP, SAE/MS, AN, weld ends, port connectors, sanitary flanges, tube adapters |
Types | Tube to Union, Tube to Male, Tube to Female, Instrument Pipe Fittings, Accessories |
Equivalent To | SWAGELOK, PARKER, DK-LOK, HOKE |
Max Working Pressure | 8MPa | 1200psi Depending on The Tubing Material |
Working Temperature | -40°C—250°C | -40°F—482°F Depending on The Tubing Material |
Configurations | Straights, elbows, tees, crosses, caps, plugs, nuts and ferrules Chromatograph and Column End |
Tube Fitting uses & application |
|
Material Test Certificates (MTC) for Tube Fitting as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
STANDARD | WERKSTOFF NR. | UNS | JIS | GOST | EN |
SS 347H | 1.4961 | S34709 | SUS 347H | – | X6CrNiNb18-12 |
Looking to Buy SS 347H Tube Fittings from Suppliers, Ask For ready stock of UNS S34709 Pipe Elbow in Mumbai, India.
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
SS 347H | 0.04 – 0.10 | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 – 19.00 | 8xC – 1.10 | 9.0 -13.0 | 63.72 min |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
NPT/ISO Pipe Size in. | Tube Fittings | |
---|---|---|
Male | Female | |
psig (bar) | psig (bar) | |
1/16 | 11 000 (757) | 6 700 (461) |
1/8 | 10 000 (689) | 6 500 (447) |
1/4 | 8 000 (551) | 6 600 (454) |
3/8 | 7 800 (537) | 5 300 (365) |
1/2 | 7 700 (530) | 4 900 (337) |
3/4 | 7 300 (502) | 4 600 (316) |
1 | 5 300 (365) | 4 400 (303) |
1 1/4 | 6 000 (413) | 5 000 (344) |
1 1/2 | 5 000 (344) | 4 600 (316) |
2 | 3 900 (268) | 3 900 (268) |
OD | OD Actual | Thread Designation – Nominal Size | Thread per inch | |
(fraction inch) | (inches) | (inches) | NPT | BSP |
5/16 | 0.3125 | 1/16 | 27 | 28 |
13/32 | 0.405 | 1/8 | 27 | 28 |
35/64 | 0.540 | 1/4 | 18 | 19 |
43/64 | 0.675 | 3/8 | 18 | 19 |
27/32 | 0.840 | 1/2 | 14 | 14 |
1-3/64 | 1.050 | 3/4 | 14 | 14 |
1-5/16 | 1.315 | 1 | 11-1/2 | 11 |
1-21/32 | 1.660 | 1-1/4 | 11-1/2 | 11 |
1-29/32 | 1.900 | 1-1/2 | 11-1/2 | 11 |
2-3/8 | 2.375 | 2 | 8 | 11 |
2-7/8 | 2.875 | 2-1/2 | 8 | 11 |
3-1/2 | 3.5 | 3 | 8 | 11 |
4 | 4.0 | 3-1/2 | 8 | 11 |
4-1/2 | 4.5 | 4 | 8 | 11 |
5-5/8 | 5.563 | 5 | 8 | 11 |
6-5/8 | 6.625 | 6 | 8 | 11 |
MIDDLE EAST Saudi Arabia |
AFRICA Nigeria NORTH AMERICA Usa |
EUROPE Russia |
ASIA India SOUTH AMERICA Argentina |