Athlete Piping Solution is a recognized supplier and distributor of Super Duplex S32750 / S32760 Pipes & Tubes, which are a heat resisting steel with excessive resistance to oxidation scaling. Super Duplex 2507 Square Pipes with additions of manganese are critical in electric engineering, in which the hot strength of copper will increase with handiest a small addition of nickel. We gift our series of particularly designed this alloy to offer efficient solutions for special commercial requirements. Product applications of this product encompass condenser tubes and plates, distiller tubes, tube sheets for condensers and heat exchangers. It is utilized in applications including evaporator and heat exchanger tubes, salt water piping, water boxes, deliver hulls and hot water tanks. It is important to differentiate among wrought alloys that are processed to semi - finished products, and forged alloys, from which castings are produced with the aid of using diverse casting processes.
Alloy 2507 Rectangular Tubes are designed for specialised electric and electronic applications, which similarly has a completely low temperature coefficient of resistance and medium-variety electric resistivity. It has excessive strength at accelerated temperatures. They are identified as an austenitic heat resistant alloy with fantastic resistance to oxidation below mildly cyclic situations thru 2000 Degree F. They are effectively fabricated through standard industrial procedures, which may be welded the use of all the not unusual welding processes. In evaluation to carbon steel, they're harder and generally tend to work harden rapidly.
Super Duplex WNR 1.4410 Hexagonal Pipes is blended with higher creep properties at temperature and so that is very difficult and ductile. It has desirable resistance to oxidation and can be utilized in non-stop provider as much as 1140 Degree C furnished lowering sulphur gases aren't present. With its excessive chromium content, it gives desirable corrosion resistance to boom excessive temperature properties. The excessive chromium and nickel contents of our products offer similar corrosion resistance. It gives advanced resistance to oxidation and the retention of a bigger fraction of room temperature electricity than the not unusual austenitic alloys.
S32750/S32760 Pipes & Tubes Specifications | ASTM A790, A789 / ASME SA790, SA789 |
---|---|
Dimensional specification | ANSI/ASME B36.19M, ANSI/ASME B36.10M |
ASTM A790 S32750/S32760 Seamless Pipes & Tubes Size | 1 / 2" NB - 16" NB |
ASTM A790 S32750/S32760 Welded Pipes & Tubes Size | 1 / 2" NB - 24" NB |
ASTM A790 S32750/S32760 EFW Pipes & Tubes Size | 6" NB - 24" NB |
Outside Diameter | 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock |
Super Duplex Steel S32750/S32760 Pipes & Tubes Manufacturing Shapes | Hydraulic, Round, Rectangle, Square, Hex, Honed |
Super Duplex Steel S32750/S32760 Pipes & Tubes Manufacturing Techniques | Seamless / Welded / ERW / Fabricated / CDW / 100% X Ray Welded |
Super Duplex Steel S32750/S32760 Pipes & Tubes Schedule Thickness Range | SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS |
Super Duplex Steel S32750/S32760 Pipes & Tubes End Types | Plain End, Beveled End, Treaded One End, TBE (Treaded Both Ends) |
Delivery Condition of Super Duplex Steel S32750/S32760 Pipes & Tubes | Annealed and Pickled, Polished, Bright Annealed, Cold Drawn |
Surface Finish | No.1, No.4, No.8 Mirror Finish, 2B |
Value Added Services | Cutting, Beveling, Polishing, Threading, Destructive, Non Destructive, Ultrasonic Testing |
Inspection and Test Reports | EN 10204 3.1, Mill Test Certificates, Chemical Reports, PMI Test Reports, Mechanical Reports, Third Party Inspection, NABL Approved Lab, Visual Inspection, Destructive Test and Non Destructive Test Reports |
Marking | Specification Grade Nominal Pipe Sizes Pipe Schedule or Wall Thickness Manufacturing Method (Seamless / Welded) Heat Number Manufacturer’s Name or Custom Logo - on request Marked Pipe Sample: ANSI B36.19 ASTM A790 S32750/S32760 12" NB SCH 40S SEAMLESS HEAT NO. XXXX |
Outside Finish | 2B, No.4, No.1, No.8 Mirror Finish for Super Duplex Steel Pipes, Finish as per customer Requirements |
Delivery Condition | Annealed and Pickled, Polished, Bright Annealed, Cold Drawn |
Packing of Super Duplex Steel S32750/S32760 Pipes | Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests |
Specials | Sizes and Specifications other than above can be on request |
STANDARD | WERKSTOFF NR. | UNS |
Duplex Steel S32750/S32760 | 1.4410 | S32750/S32760 |
Looking to Buy SDSS S32750 Pipes & Tubes from Suppliers, Ask For ready stock of UNS S32760 ERW Pipes in Mumbai, India.
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
Duplex Steel S32750 | 0.030 max | 1.2 max | 0.80 max | 0.035 max | 0.020 max | 24.0 – 26.0 | 3.0 – 5.0 | 6.0 – 8.0 | 0.24 – 0.32 |
Duplex Steel S32760 | 0.05 max | 1.0 max | 1.0 max | 0.030 max | 0.010 max | 24.0 – 26.0 | 3.0 – 4.0 | 6.0 – 8.0 | 0.20 – 0.30 |
Density (g/cm 3) | Density (lb/in 3) | Melting Point (°C) | Melting Point (°F) |
7.8 | 0.281 | 1350 | 2460 |
Outside Diamter, OD (in mm) | Wall Thickness, WT (in mm)> |
---|---|
6mm – 630mm | 0.5mm-30mm |
12.7mm* 12.7mm to 300mm* 300mm | 0.5mm-30mm |
10*20mm to 100*200mm | 0.5mm-30mm |
6mm to 630mm | 0.5mm-30mm |
12.7mm to 76.2mm | 0.5mm-2.0mm |
12.7mm to 250mm | 0.5mm-30mm |
12.7mm to 76.2mm | 0.5mm-2.0mm |
16mm to 85mm | 0.5mm-3.0mm |
13mm to 85mm | 0.5mm-2.0mm |
22mm*0.7mm to 108mm*2.0mm | 0.5mm-2.0mm |
12.5mm to 203.2mm | 1.0mm – 5mm |
6mm to 430mm | 0.8mm – 30mm |
MIDDLE EAST Saudi Arabia |
AFRICA Nigeria NORTH AMERICA Usa |
EUROPE Russia |
ASIA India SOUTH AMERICA Argentina |